3D SPEED is the most popular AIO product on the market world-wide. The reason why is because it works so good and it’s so fast and easy to work with. In fact, it’s the most versatile AIO on the market today. 3D SPEED can be used with any type of machine, any type of pad, and is the most effective AIO on the market if you choose to work by hand.
Just one of the reasons 3D SPEED is so popular is due to the proprietary abrasive technology created at 3D’s own manufacturing plant in Santa Clarita, California. Unlike most brands, 3D makes their own abrasive technology in their privately owned manufacturing plant based upon their own research and development by their team of in-house chemists. Everything from the raw materials to the finished product is controlled and manufactured by 3D. It doesn’t get any more real than this.
Beside incredible paint correction and polishing ability, 3D SPEED leaves behind a layer of synthetic paint sealant blended with Montan Wax. This proprietary blend creates a sealant that offers long lasting shine with excellent resistance to high heat climates as well as resisting corrosion from exposure to chemical contamination. This blended sealant also offers excellent gloss, shine, and slickness for reduced marring anytime you wash, dry or in any way wipe the finish.
What is it? - 3D SPEED is the world’s best AIO or All-in-One. The term AIO is interchangeable with the term cleaner/wax, that is it’s like mixing a compound, a polish, and a wax into one bottle.
AIOs are one of the oldest categories of paint correction products in the car detailing industry. These products were first introduced in the early years when automobiles were first introduced and replacing horse-drawn carriages as a means of transportation. This category of product enables a person to maintain their car’s finish quickly and easily by removing oxidation and restoring the full richness of color while leaving behind wax protection.
What does it do? - 3D SPEED does three paint correction processes in a single step,
1: Compound - 3D’s unique and proprietary abrasive technology removes defects like swirls, scratches, water spots and oxidation WITHOUT inflicting micro-marring at the same time.
2: Polish – 3D’s own polishing agents pick up where the compound leaves off to create a clear, high gloss shine with maximum D.O.I or distinction of image.
3: Protection – 3D SPEED seals the surface to lock-in the achieved results while locking out all the corrosive substances found in the environment that act to attack and corrode the paint.
While it can be a tick difficult to wrap your brain around how a single product can remove defects while at the same time leaving protection behind – using this product just ONE time will make you a believer.
When do you use it? - Anytime you want to restore a better-than-new factory shine to your car’s paint. And the good news is you can use this product on virtually any type of paint and also gelcoat, plastic surfaces, and even clear bras or PPF or Paint Protection Film as is known in the detailing industry. You can even use this product on glass to remove light water spotting, road film and drizzle stains. 3D SPEED is as close to a miracle product you can find it’s that good.
Why use 3D SPEED over other options? - Why use 3D SPEED over competitor’s products? This is an easy question to answer… because it works so well.
Let’s take an in-depth look at why 3D SPEED is so good and why everyone should have this product in their detailing arsenal.
3D products use the BEST abrasive technology in the world.
The most important factor when it comes to working on car paint is the abrasive technology.
Why? Because it is the abrasive technology that is touching the paint first.
It is the abrasive technology that must do the impossible. It must abrade the surface to remove defects without at the same time leaving in their place its own defects. Any abrasive technology that can do this is an engineering marvel. The fact of the matter is most paint correction products cannot do this. When it comes to abrasive technology, products either work or they don’t. There are no gray areas. Products do not kind of work.
If the products you’re used to working with remove defects, but the results always look hazy in the sun – chances are good this is micro-marring caused by inferior abrasive technology. When this happens the only way to undo the damage is to re-do the job only this time using great abrasive technology. Same yourself time, energy, and frustration – use products from 3D, including 3D SPEED.
